How To Determine If Wood Finish, Varnish, And Oils Have Expired And Extend Or Dispose Of Them

The first is to wipe off the bubbled coat of finish using a rag dampened with mineral spirits, naphtha or turpentine. You can do this for 15 to 30 minutes after application without a problem. You won’t damage the coat underneath, and you don’t have to get all the polyurethane removed. Simply wipe until what is left is smooth and bubble-free.

You can install it using a variety of application techniques. Despite my lack of formal training, I found it easy to apply my chosen finish. Now, my floors look nearly as shiny and new as the day when I moved in. Any Penetrating Stain such as MinWax® wood stain products Penetrating Stains require a thicker wood surface to work properly. A good idea for preventing bubble formation is to dip the paintbrush in some mineral spirit for about ten minutes. Then, you can remove the excess mineral spirits by blotting the brush on an old newspaper.

Best Water Based Polyurethane For Hardwood Floors Comparison & Review

If you need to use the the wooden material in high temperatures and water , polyurethane based in oil will be more effective than polycrylic. If you want to apply sealer, you should use polycrylic paint because oil-based polyurethane can cause a yellow color tint. This can avoid the tint from seeping through the other layers you add onto the material. It’s fairly important to apply the stain within the recommended window of time—from 15 minutes to about two hours of application of the conditioner.

So all my concerns have been answered in this QTT blog. Hmmm, not sure it’s ever been done before but I would recommend priming/sealing with a drywall primer before applying any type of paint. Most brands of wax will prevent the poly from adhering.

Minwax Stains

Also, I have found with some varnishes, too many coats of semi-gloss or stain leads to streaks in the surface. P.S.- I am a General Contractor and I also have a custom closet business. If I have a sub that gets offended because I question a method, technique, or otherwise then they usually don’t get invited back. This reaction tells me that they think they know everything and don’t want to learn anything new. As a contractor and sub-contractor I am ALWAYS looking for new and better ways of doing things.

Short drying time is nice, although I let mine set over night. You could also wait until the polyurethane is completely dried, and then sand out the bubbles to achieve a smooth and even surface. When applying a new layer of polyurethane, thinning it with water or mineral spirits will help to prevent bubbles from forming.

Bona Mega Wood Floor Finish

You can thin water-based finishes with water to improve atomization, but the thinning is different than with lacquer. Very little water makes a much bigger difference than lacquer thinner in lacquer. So try 5 percent or so at first and see how this works.

Varnish vs. Polyurethane – How to Choose –

Varnish vs. Polyurethane – How to Choose.

Posted: Sat, 16 Jan 2016 09:34:57 GMT [source]

We hired a local professional painting company here in Fort Lauderdale, Florida to refinish our front door. First day sanding then the 2nd and 3rd day applying a coat of satin finish clear varnish. It has been well over a month at this point.

New Posts!

The pricing of the Dura Seal 1G Satin 310 Polyurethane is fair enough and relatively cheaper although the price tag appears massive compared to others at first glance. This is because this product comes in a one-gallon size whereas its close substitutes come in one-quartz, which is equivalent to one-quarter of the gallon size. The product may require more coats to achieve the advertised potential but this does not bring about an increase in cost. It is ideal for large projects or several small projects because of its increased content. Its matte design tends to alter the natural wood grain appearance. You can also use a water-based spray/no-wipe stain.

High gloss has the highest luster level of all the finishes. This is not often used for high traffic hardwood floors. A “High gloss” finish just minwax vs varathane might drive you a bit crazy if you’re thinking about it for a kitchen or dining room, and if you have pets and small children running around.

How To Apply Polyurethane

This will help knock down the little nibs, smoothing out the surface, but it won’t make any visible scratch marks. You can make a wiping formula from any varnish/poly simply by diluting it with mineral spirits. But you are right, you won’t find a wiping version of a marine or spar varnish on the market (at least that I’ve seen). Spar varnish is a finish that remains a little more flexible, which is why it better for outdoor conditions.

The Varathane Premium oil-based Floor Finish is painstakingly formulated to provide optimum protection for hardwood floors. Varathane Premium Oil-Based Clear Floor Finish provides outstanding scratch and stain resistance to keep your interior hardwood floors looking great. It is recommended for interior bare hardwood floors as it would not give good results when used on surfaces such as linoleum, vinyl, glazed tiles or metal. It has astonishing durability hence, it is ideal for high traffic areas in kitchens and hallways. This Minwax product has a low odor, dries fast, and is crystal clear.

This means that you can use it anywhere without having to worry about plugs and power cables. However, this does not mean that the power or capacity is limited. This sprayer uses a Dewalt XR lithium-ion battery system that lasts long and charges fast.

minwax vs varathane

A few months back, and at quite an expense, I had a nice set of oak sideboards and an oak headache built for my pickup truck. I elected to finish them myself thinking that I’d save some money. I sealed them with CWF-UV deck and siding sealant. In a short matter of time, the oak developed grey/black spots, I assume from moisture/mildew.

Staining Soft Woods

Oil-based polyurethane has a thicker consistency and will offer great results after three or four coats. How many coats of polyurethane you apply really depends on how much use the surface will get, and what level of protection it needs. This polyurethane can be used over bare wood or finished wood, and it provides superior protection. A great feature of this oil-based polyurethane is how fast it dries. You still get a high level of durability, but the product manages to dry much faster than others. As mentioned above, oil-based polyurethane finishes are extremely strong and resistant to many influences when they are cured.

However, they are also less odorous, dry faster, and require less prep work. Take the time to explore your different options. This way, you can be sure that you choose a quality product that fits into your budget. Most homeowners opt to brush or roll polys finishes.

If you used a penetrating oil stain, you may have allowed the stain to build up too thick a coat on the surface of the wood. Penetrating wood stains are not intended to be a surface finish. If applied too thickly, they won’t dry properly and will remain tacky to the touch. This can also happen if the wood wasn’t stripped and sanded completely down to bare wood, since the stain will sit on the surface rather than soaking into the wood.

  • Birch did surprisingly well and the oaks were naturals.
  • If you read through the comments above, you’ll see that other folks have had issues with Helmsman.
  • Generally, if the poly is starting to bubble and peel, the best repair would be a complete do over.
  • I’m getting ready to seal my oak floors and I’ve been researching products also.
  • The fact that yours went away is probably a good sign.
  • All of the wood types accepted the stain well, except the non-conditioned Birch side.
  • This method will result in a super smooth finish with no bubbles and no brush strokes.
  • If you didn’t wipe back the stain, curing can be a major problem.

Varathane Gallon Gloss Waterborne Diamond Floor Finish will give your surfaces a glossy protective finish. It also improves the appearance of hardwood by highlighting its natural beauty. It is manufactured with a water-based formula which increases its versatility and uses for a variety of surfaces especially hardwood floors. This Minwax Fast-Drying Polyurethane is easy to use and makes wood easy to be cared for as it offers maximum protection against an array of potential damages. Upon application, this polyurethane dries very fast and is assured to bring long-lasting beauty on different wood surfaces.

If you want to use spar varnish, go ahead and apply 4-5 coats using the wiping method described in this article. If you want to go the epoxy route, just follow the instructions from the manufacturer. But I honestly thing the spar varnish will be adequate. If you are using a wiping method, you’ll never get rid of the flaws in the surface. The finish will just follow the contours of whatever you apply it to. If you pour the varnish, there’s a good chance it will level.

These finishes are quite thick – something that influences how many coats of polyurethane you add. Oil-based products also contain rather a high level of VOCs – something that makes them less easy to find. Alkyd is a substance found in basically any varnish or oil-based paint. By adding polyurethane resin to this, you get a much stronger and more resistant product.

The re-stain and wipe of a 4′ square took about 30 minutes. The Clorox wipes only took so much effort and a 20′ square took 2-1/2 hours. The Murphy’s Oil Soap, then Clorox wipes, then paper toweling of a 40′ square took less than an hour and the results were perfect.

But all polyurethanes can be made to level perfectly by adding mineral spirits. So the way to get a brush-mark-free finish is to sand the next-to-last coat level, then thin the last coat enough so it levels well. But on hot days when the skinning-over occurs faster and traps the bubbles, you may need to help the popping along by “tipping-off” using your brush. Brush lightly back over the finish right after application. (You should do this anyway to line up the brush strokes with the grain.) Most of the bubbles will disappear.

Despite its odor and higher toxicity, oil-based polys are slightly more durable and offer much better protection against heat. Water-based polys are more expensive, but dry quickly and do not affect the wood’s color. Do this on some scrap before you start in on your workpiece. My problem is the gel’s dry to fast to allow me to add grain impressions.


Posted on June 6, 2021, in Top product Reviews. Bookmark the permalink. Leave a comment.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: